An exclusive combination of equipment that combines high performance and competitiveness to overcome the challenges of Industry 4.0
At Altus, we have the necessary know-how to provide integrated systems for the most varied demands of the industrial market
Discover our solutions and discover how our expertise can help boost your business performance
See how we have become a reference in the automation market over the course of our more than 40 years
We are 100% available to solve problems, answer questions and help you optimize the performance of your application.
Get to know our units and find out where to find our sales representatives throughout Brazil
PROFIBUS-DP master module for use with Nexto Series CPUs. This module allows access to up to 3584 input bytes and 3584 output bytes, in addition to supporting redundancy for applications where high availability is expected.
01 RS-485 Serial Interface
PROFIBUS-DP
CE and RoHS
DNV Type Approval
cUL/US Listed
UKCA
EAC
Suporte para até 125 escravos (utilizando repetidores de rede)
Suporte à arquitetura redundante
Support for Global Control Commands (Sync, Unsync, Freeze, Unfreeze)
Suporte à troca à quente
One Touch Diag
Electronic Tag on Display
Display and LEDs for diagnostic indication
Transmission rate up to 12 Mbits/s
MasterTool IEC XE is a complete tool for programming, debugging, configuring and simulating user applications. The software is based on the concept of an integrated tool, providing flexibility and ease of use, allowing users to program in six languages defined by the IEC 61131-3 standard.
Module with 16 isolated source/sink inputs for general use.
The NX1005 is a mixed module that offers 8 protected source-type digital outputs and 8 isolated source/sink-type digital inputs for general use. The NX1005 uses only one position in the Nexto Series rack and has exclusive features such as Electronic Tag on Display, Easy Plug System and One Touch Diag.
Module with 16 protected source-type outputs for general use.
Module with 16 protected relay outputs, source type, for general use.
With a response time of 4 ms per cycle, the NX3003 is the best performing solution for the machinery market. The module has four fast inputs for encoder reading (unidirectional, bidirectional and quadrature) and four fast outputs for stepper motor control (PTO/PWM).
With high processing speed and large data storage capacity, the NX3004 CPU is suitable for small machines and systems that do not require a very complex automation structure.
Além de alta velocidade de processamento (1000 contatos a cada 6 microssegundos) e ampla capacidade de armazenamento de dados, a CPU NX3005 ainda conta com suporte a WebServer, fazendo com que seja uma opção de ótimo custo-benefício para demandas dos segmentos de saneamento, automação predial e da indústria em geral.
Com alta velocidade de processamento, ampla capacidade de armazenamento de dados, expansão de barramento para até 24 bastidores e diagnósticos avançados em tempo real, essa é a mais robusta unidade de processamento da Série NX.
A robustez e o alto desempenho do processador RISC Power PC de 32 bits fazem da NX3010 uma CPU ideal para grandes máquinas e sistemas de pequeno a médio porte.
With high processing capacity, bus expansion for up to 24 racks and advanced real-time diagnostics, the NX3020 CPU is ideal for medium and large automation systems
Com alta velocidade de processamento, ampla capacidade de armazenamento de dados, expansão de barramento para até 24 bastidores e diagnósticos avançados em tempo real, a unidade de processamento mais robusta da série também oferece suporte a redundância.
A robustez e o alto desempenho do processador de 64 bits fazem da NX3035 uma CPU ideal para sistemas que exigem elevado poder de processamento e alta disponibilidade.
The NX4000 module allows I/O modules to be easily distributed in the field, and can be used both as local I/O points (located next to the CPU module) and as remote I/O points, without any loss in performance.
The NX4010 module is used for redundant applications in half-clusters, where there is a need for high availability of the automation system. It is responsible for connecting the two half-clusters.
Ethernet module for applications that require more Ethernet interfaces than those provided by Nexto CPUs or in applications where there is a need for high availability of the automation system with the use of network redundancy
Head-slave type device for MODBUS TCP networks, allowing the user to use all input and output modules of the Nexto Series.
Head-slave device for MODBUS TCP networks with integrated input and output interfaces, allowing the user to use all input and output modules of the Nexto Series.
Head-slave devices for PROFIBUS-DP networks, enabling the user to use all I/O modules of the Nexto Series.
Head-slave devices for PROFIBUS-DP networks, enabling the user to use all I/O modules of the Nexto Series.
Module with eight analog inputs that can be individually configured as voltage or current input. The product also provides different scales for both voltage and current inputs.
Module with eight thermocouple analog inputs that can be individually configured for different thermocouple types. The product also provides different temperature scales in degrees Celsius or Fahrenheit
Module with eight individually configurable analog current inputs with HART. In addition to enabling the reading of signals from field instruments through the conventional 0-20 mA signal, these inputs also allow HART communication with the instruments through the CPU's Ethernet port using an asset management tool that supports DTM technology.
Module with eight individually configurable analog inputs for reading RTD (Resistance Temperature Detectors) temperature sensors. The module allows the use of temperature scales in Celsius or Fahrenheit degrees and parameterizable filters that assist in the implementation of systems for industrial automation and process control.
Module with four analog outputs that can be individually configured as voltage or current output. This module also provides different scales for both voltage and current outputs.
Module with four individually configurable analog current outputs with HART. In addition to enabling the control of field actuators through the conventional 0-20mA signal, these outputs also allow HART communication with the instruments through the CPU's Ethernet port using an asset management tool with support for DTM technology.
Power supply with up to 30 W of power, supplied to the other modules through the racks. The module has an isolated 24 Vdc input with an internal protection fuse accessible through the side cover of the module.
The NX9000 (8-position backplane rack) is the perfect choice in applications with few or no local I/O points.
The NX9001 (12-position backplane rack) is a great solution for applications with few I/O points.
The NX9002 (16-position backplane rack) is an excellent choice for applications with higher I/O point density.
The NX9003 (24-position backplane rack) is the ideal choice for large applications and systems that demand a higher density of I/O points.
The NX9010 (8-position non-hot-swap backplane rack) is a suitable solution in machine applications.
The NX9020 (2-position panel mount base) is a suitable solution for applications that do not require I/O modules.
The NX9100 is a pair of side closures for the frame designed to protect the ends of the frame. This accessory is recommended for individual purchase.
The NX9102 is a connector cover for unused positions of the Nexto Series racks. This cover was specially developed to provide high protection for unused rack connectors.
Cabo de comunicação Ethernet CAT5 com 2 metros de comprimento, equipado com conectores macho RJ45 em ambas as extremidades.
Cabo de comunicação Ethernet CAT5, com 5 metros de comprimento e conectores macho RJ45 em ambas as extremidades.
Cabo de comunicação Ethernet CAT5, com 10 metros de comprimento e conectores macho RJ45 em ambas as extremidades.
Conectores utilizados nos módulos de entrada e saída da Série Nexto projetados para facilitar a instalação, manutenção e substituição dos módulos.
Conectores utilizados nos módulos de entrada e saída da Série Nexto projetados para facilitar a instalação, manutenção e substituição dos módulos.
Conectores utilizados nos módulos de entrada e saída da Série Nexto projetados para facilitar a instalação, manutenção e substituição dos módulos.
Conectores utilizados nos módulos de entrada e saída da Série Nexto projetados para facilitar a instalação, manutenção e substituição dos módulos.
Conectores utilizados nos módulos de entrada e saída da Série Nexto projetados para facilitar a instalação, manutenção e substituição dos módulos.
Conectores utilizados nos módulos de entrada e saída da Série Nexto projetados para facilitar a instalação, manutenção e substituição dos módulos.
Nenhum produto encontrado.
Av. Theodomiro Porto da Fonseca, 3101, lote 01 – São Leopoldo/RS – Brasil
CEP 93022-715
© 2025 Altus
Criação de sites pela Agência de Marketing Digital Orgânica Digital.
