Altus confirms its presence at FENASAN 2025, the largest water and wastewater and environmental event in the Americas,which will take place from October 21 to 23 at the Expo Center Norte, in São Paulo.
In its 36th edition, the fair and the 36th AESabesp Technical Meeting (which accompanies it) have as their central theme"Water and wastewater and Innovation: pillars for a rugged and sustainable future,"reinforcing the strategic importance of the sector. The event, which will feature more than 330 exhibitors and an expected audience of over 34 thousand visitors, is the meeting point for specialists, managers, researchers, and equipment in the water and wastewater sector.
With expertise in the development of automation technology in Brazil, Altus will present solutions designed to boost the universalization of services and increase operational efficiency in the water cycle, a crucial objective for the sector until 2030.
Visitors will have free vans offered by AESabesp at their disposal, which will make the round trip between the Portuguesa-Tietê Metro Station and the Expo Center Norte throughout the entire period of the event. Check out details of the boarding points:
Portuguesa-Tietê Station:
- - Time: from 7:30 a.m. to 9 p.m.
- - Upon disembarking at the station, exit onto Rua Marechal Odylio Denys (corner of Av. Cruzeiro do Sul), cross the street, and proceed to number 138, where the Unipare Parking Lot is located — the departure point for the vans.
Expo Center Norte:
- - Time: from 7:30 a.m. to 9 p.m.
- - The return boarding point will be at the official parking lot tent, located in front of the Expo Center Norte.
And visitors who stop by booth O18 will be able to ask questions of our specialists and explore Altus technologies up close that guarantee the ruggedness, high performance, and standardization necessary in modernization projects in various water and wastewater enterprises, such as:
NX3008: a global CPU for your business
The main attraction we will be bringing will be theNX3008, a high-performance CPU from the Nexto NX series of controllers. With advanced security functionalities, high capacity formodular architectures connected to the NX and NJ modulesand virtualization, it is a complete solution for systems that require extensive connectivity, delivering performance and versatility for the most varied demands.
The most advanced Nexto NX device has 3 Ethernet ports, with one being Gigabit type and two with PROFINET Controller protocol support, which allows the controller to be used in a network with an MRP ring architecture.
Another advanced feature available isits embedded Docker platform.The resource, native to the CPU, makes software virtualization possible. This gives:flexibility and speed to your operations,enabling multiple software processes to run simultaneously within the CPU itself.
Nexto XF: advanced connectivity, smart performance
The new XF series as a whole stands out for its high density of embedded I/O modules, offering up to 44 integrated points in a single controller between digital and analog inputs and outputs, depending on the chosen model(check with our sales team at the booth to check the availability of the products).
For applications demanding more I/O points, the system can be easily expanded through expansion modules coupled to the high-speed bus. Flexibility extends even further with the ability to increase I/O points through remote (distributed) devices, which communicate via protocols such as CANopen, EtherNet/IP, PROFINET, EtherCAT, and MODBUS.
This combination of high processing capacity, low energy consumption, compact format, and extensive I/O modularity, added to the rugged expansion options, makes the Nexto XF series a highly versatile solution. At our booth, you will be able to see the first prototype developed for this new series of PLCs.
Operate in the IoT universe with the Nexto XP series
The compact Nexto XP PLCs are the ideal solution for meeting the demands of highly connected environments.
With embedded communication interfaces for Ethernet, Serial RS 485, CAN, and USB, these PLCs feature support for a varied list of communication protocols, such as MODBUS TCP and RTU, PROFINET, CANopen, J-1939, IEC 60870-5-104, EtherNet/IP, OPC DA, OPC UA, and MQTT.
The XP340 model is a compact, high-density I/O solution, designed for stand-alone and distributed applications. Its DIN rail mounting design makes it perfect for limited spaces in control panels. The XP340 also features WebServer supporta tool that enables the creation of application supervision and monitoring screens without the need to use a SCADA equipment.
NX3005: the ideal CPU for water and wastewater systems
Just like the other Nexto controllers, the NX3005 was developed in accordance with the programming language specifications provided in the international standard IEC 61131-3. The module has connection via Ethernet and serial ports, bus expansion capability, hot-swapping of modules, and support for the protocols IEC 60870-5-104 Server, EtherNet/IP, MODBUS RTU, MODBUS TCP, MODBUS RTU/TCP, SNTP, SNMP, OPC DA, and OPC UA.
The model also uses MasterTool IEC XE, our free software for applications up to 320 points.
Distributed I/O systems for automation with the G Series
The G Series is an I/O Remote series designed to respond to the demands of the most modern industrial equipment with high technology.
With a flexible, versatile, and smart architecture, the series stands out for its high scalability, ease of maintenance, and compatibility with multiple communication protocols.This set of characteristics makes the G Series remote equipment a highly adaptable solution, capable of operating in complex and varied industrial environments, from sectors such as manufacturing and automotive to critical installations in energy and infrastructure.
Telemetry and high connectivity with datalogger and LoRa gateway
Created to operate in the monitoring and telemetry processes of the most different areas of the industry, the NL717 datalogger and LoRa Gateway GW700 act in the collection and transmission of data in power generation facilities, hydrological and meteorological stations, among other equipment that require remote data collection.
They use the LoRa communication protocol, a long-range and low-power radio communication technology widely used in various applications in the IoT universe.
Watch the video below to learn about this equipment in detail:
Reliability and durability in asynchronous drives across various power ranges
With high performance and low energy consumption, Optidrive frequency inverters present themselves as a solution with excellent cost-benefit for the control of machines and electric motors.
With a wide range of options, the multipurpose drivers of the Optidrive E3, Optidrive ECO, and Optidrive P2 families are suitable for controlling low-power three-phase asynchronous motors.
Features like precise speed control, energy optimization, and sleep/wake functions ensure energy savings for applications like HVAC. Additionally, all products in the Optidrive Eco family feature support for the BACnet and MODBUS communication protocols, which are ideal features to facilitate installation in building equipment.
Speed and economy for applications with the X2 and P2 HMIs
The X2 series HMIs provide a local and intuitive point of interaction for the control and visualization of processes. The terminals' design is rugged and features a cast aluminum mechanical structure that combines high quality with lightness. The front is completely flat, which facilitates cleaning and prevents dust accumulation.
The 7-inch widescreen display with TFT technology offers 30% more usable area and allows for brightness adjustment and high contrast. The resistive touchscreen has a lifespan of 1 million touches,ensuring durability and reliability.
Complementing the X2 series, the P2 series of HMIs also presents itself as a rugged and reliable solution for industrial operation and visualization applications. Designed with high-performance hardware and a modern design, the flexibility of the P2 series is evidenced by the availability of models with and without an Ethernet port, in addition to supporting serial and USB communication interfaces.
The P2 models can also be combined with a CPU on the rear, creating a compact and integrated PLC+HMI solution, making it ideal for small and medium-sized automation applications. Both the X2 and P2 families support remote access via VNC, enabling remote control and monitoring.
Guarantee energy efficiency with the PH3500 multi-meter
The PH3500 multi-meter allows for the remote monitoring of energy consumption in the most diverse applications, such as energy billing in residential and commercial condominiums, electrical equipment in small and large industries, energy generation plants, and other electric power distribution facilities.
With the capacity to be used in voltage, current, frequency, power, energy, and demand measurement applications, this equipment has measurement of voltage and current harmonics up to the 31st order and the capacity to record electrical quantities in general in mass memory.
High-speed communication with the Connect switches
Our series of industrial switches offers a wide variety of models designed to meet the most diverse applications in different industry segments. With them, it is possible to integrate PLCs, HMIs, frequency inverters, and supervision stations efficiently and securely. The devices feature advanced management resources that ensure high network availability, in addition to a rugged design with an IP30 protection rating, making them ideal for operation in severe environments, such as machine control boxes and electric power substations.
The future of the industry is smart and increasingly connected.
Altus offers the necessary technology to prepare your company for this future.
